Wear Blocks, Buttons & Bars

Easy to use with no excessive cutting when compared to sheets or plates. The blocks are pre-notched for easy forming onto contoured surfaces to provide an extra level of protection for wear and impact applications.

Stocked Sizes

– 40mm, 50mm, 60mm

Offer excellent wear protection and extensively used in hotspot areas found on heavy equipment such as buckets, loaders, excavators and draglines buckets.

Stocked Sizes:

– 50mm, 60mm, 75mm, 90mm, 100mm

Can be formed and welded onto flat or curved surfaces. This allows them to be used on a range of fixed plant and mobile equipment such as buckets and chute liners. Available in 50mm and 100mm thicknesses.

Stocked Sizes:

– 90mm, 115mm, 125mm, 150mm, 210mm, 230mm, 290mm, 300mm, 452mm.

Ni-Hard is a white cast iron product alloyed with nickel and chromium to possess excellent abrasion and moderate impact resistant properties.

Ni-Hard is commonly used in power generation, brick, asphalt, cement, concrete, rock, sand and gravel industries. Typical castings are mill or mixer liners, mixer tips and slurry pumps.

Hardfaced ECI2460 is a cored wire used for hardfacing components subject to all types of abrasion and heavy impact. The weld deposit contains hard complex carbides in a tough matrix. This type of alloy performs well in both fine and coarse abrasion.

ECI2460-8mm is a tubular electrode used for manual application of hardfacing components also subject to abrasion and heavy impact.